Arrow SR68206 Bedienungshandbuch PDF herunterladen (Seite 14)

The front floor frame is made up of

three pieces. The rear floor frame is

made up of two pieces. The holes in

these pieces will align when the

pieces are positioned with correct

amount of overlap. The illustrations

below show the proper overall length

for the front and rear. Proceed as

follows:

1 Place the front floor frames as

shown. Center the ramp, with drain

holes facing outside, on top of the two

front floor frames. Join the frames by

inserting eight screws.

2 Overlap the rear floor frames as

shown. The holes in these pieces

will align when the pieces are posi-

tioned with correct amount of over-

lap. See the illustrations below for

the proper overall length of the rear

floor frame. Join the frames by insert-

ing five bolts into frame set as shown.

3 Double check the length of each

and set these pieces aside for later

use.

14

Step 1

Q14

● Parts Needed For ●

Floor Frame Assemblies

●●

●●

● 8934 Ramp (1)

●●

●●

● 9367 Front Floor Frame (2)

●●

●●

● 8936 Rear Floor Frame (2)

9367

STEP

1

8934

Front Floor

Frame Assembly

119 3/8" 303,2 cm

STEP

2

9367

8936

Rear Floor Frame

119 3/8" 303,2 cm

8936

119 3/8" 303,2 cm Front

119 3/8" 303,2 cm Rear

STEP

3

8936

9367

8934

9367

DRAIN HOLES FACE

OUTSIDE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare