Arrow BW54 Bedienerhandbuch PDF herunterladen (Seite 16)

1 Position rear corner panels at the

corners of the floor frame as shown.

The widest part of each corner panel

must be placed along side of the build-

ing. Fasten corner panels to the floor

frame using four screws.

Support the corner panel with a step

ladder until overlap is fastened.

2 Attach the front corner panels to

the front corners, as shown. The

crimped rib should go under the rib of

the adjacent panel. Fasten overlap-

ping rib using 2 screws and a bolt with

nut.

NOTE

Be careful to install the correct

panel in each position as shown.

3 Double-check the part numbers of

the corner wall panels, before proceed-

ing.

16

The remainder of the building assembly

requires many hours and more than one

person. Do not continue beyond this point

if you do not have enough time to com-

plete the assembly today. A partially

assembled building can be severely

damaged by light winds.

NOTE

Each screw and bolt in the wall

requires a washer.

● Parts Needed For ●

Corners

Step 3

●●

●●

● 7044 Corner Wall Panel (2)

●●

●●

● 6633 Corner Wall Panel (2)

The floor frame must be square

and level or holes will not align.

FRONT

STEP

TOP VIEW

7044

SIDE

REAR

Narrow

Side

6633

6633

SIDE

WideSide

1

STEP

2

7044

7044

6633

6633

Panels rest on

frame as shown

Crimped Rib

Underneath

Washer

STEP

3

BI16

7044

CORRECT

INCORRECT

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare