Arrow VT1231 Bedienerhandbuch PDF herunterladen (Seite 35)

35

● Parts Needed For ●

Ridge Caps 12x17, 12x24 & 12x31

Step 24

BW35

●●

●●

● 7828 Middle Roof Panel (see below)

●●

●●

● 7843 Ridge Cap (see below)

●●

●●

● 7827 Left Roof Panel (1)

●●

●●

● 6874 Ridge Cap (1)

8

STEP

STEP

IF YOU ARE BUILDING A 12x24

Replace ridge cap 6874 with an additional

ridge cap 7843 and install ridge cap 6874

to rear of building.

IF YOU ARE BUILDING A 12x31

Replace ridge cap 6874 with 2 additional

ridge caps 7843 and install ridge cap

6874 to rear of building.

1Continue weather stripping and fas-

tening overlaps.

2Position a ridge cap 7843 on the

completed front roof section.

3Install 2 middle roof panels.

4Install the second ridge cap 7843

overlapping the first ridge cap. Align

the holes and fasten using bolts.

5Temporarily remove right rear roof

panel. Install 4 middle roof panels.

As each panel is fastened, carefully

raise 2nd ridge cap slightly away

from panels for fasteners and tape.

6Install the right and left roof

panels at the rear gables. Follow

fastener sequence.

7Install the third ridge cap 6874

overlapping the second ridge cap.

Align the holes and fasten using

bolts.

8Fasten the lower end of the pan-

els to the side top angle using

screws.

3

STEP

6

STEP

1

STEP

4

STEP

2

STEP

7

STEP

5

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare